FRENES

BMW M4 G82-G83 PCD

from 2021
VERIFIED
⌀66.5
PCD5x112
Centre bore66.5 mm
Offset (ET)ET20
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres275/40R18, 285/35R19, 275/35R19, 285/30R20
19/20 pouces : M4 CSL ; alésage 66,6 annoncé sur la phase 2 (2024)
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BMW M4 G82-G83

A BMW M4 G82-G83 (from 2021) uses a 5x112 PCD and a centre bore of 66.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.5 mm.
  • Offset: the original is ET20. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 275/40R18, 285/35R19, 275/35R19, 285/30R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the BMW M4

Previous generation: BMW M4 F82 (from 2014) — the bolt pattern changes (5x112 instead of 5x120): the wheels are not interchangeable.

M4 F82 from 2014 · 5x120 M4 G82-G83 from 2021

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x112 66.5 mm 9.5Jx18 ET20 275/40R18
Arrière 5x112 66.5 mm 10.5Jx19 ET20 285/35R19
Avant 5x112 66.5 mm 9.5Jx19 ET20 275/35R19
Arrière 5x112 66.5 mm 10.5Jx20 ET20 285/30R20

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.5 mm centre bore: wheels from these vehicles bolt on and centre on a BMW M4 G82-G83 without rings. Offset, width, diameter and caliper clearance still need checking.

BMW 5 Serie G60-G61-G68 from 2024 BMW 2 Serie Active Tourer U06 from 2022 BMW M3 G80-G81 from 2020 BMW 6 Serie G32 2018–2023 BMW X3 G01 from 2018 BMW 5 Serie G30-G31 2017–2024 BMW 2 Serie Gran Tourer F46 2015–2023 BMW 7 Serie G11 2015–2022 BMW 7 Serie G12 2015–2022 BMW 2 Serie Active Tourer F45 2014–2022 BMW i8 2014–2020 BMW i3 2013–2022 Audi Q8 e-tron from 2023 Audi A4 from 2019 Audi RS Q8 from 2019 Audi RS6 C8 from 2019

Will wheels from another vehicle fit your M4 G82-G83?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a BMW M4 G82-G83?

A BMW M4 G82-G83 (from 2021) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a BMW M4 G82-G83 need a hub centric ring?

The centre bore (hub diameter) of a BMW M4 G82-G83 is 66.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BMW M4 G82-G83?

The recorded original offset is ET20 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BMW M4 G82-G83?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BMW M4 G82-G83?

With the same PCD (5x112) and the same centre bore (66.5 mm), these include: BMW 5 Serie G60-G61-G68, BMW 2 Serie Active Tourer U06, BMW M3 G80-G81, BMW 6 Serie G32. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.