A BMW X6 E71 axe avant (2008–2014) uses a 5x120 PCD and a centre bore of 74.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 74.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 74.1 mm.
Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 255/50R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x120 PCD and same 74.1 mm centre bore: wheels from these vehicles bolt on and centre on a BMW X6 E71 axe avant without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 74.1 mm, and will not fit if it is smaller.
A BMW X6 E71 axe avant (2008–2014) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.
Does a BMW X6 E71 axe avant need a hub centric ring?
The centre bore (hub diameter) of a BMW X6 E71 axe avant is 74.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a BMW X6 E71 axe avant?
The recorded original offset is ET48. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a BMW X6 E71 axe avant?
The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a BMW X6 E71 axe avant?
With the same PCD (5x120) and the same centre bore (74.1 mm), these include: BMW X6 F16, BMW X5 F15, BMW X5 M F15, BMW X5 M E70. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more