FRENES

Citroen Berlingo I PCD

1996–2008
VERIFIED
⌀65.1
PCD4x108 or 5x108
Centre bore65.1 mm
Offset (ET)ET18 to ET47
Fixing typeM12x1.25
Tightening torque85 Nm
Original tyres195/65R15
⚠ This model comes with 4x108 or 5x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 65.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Citroen Berlingo I

A Citroen Berlingo I (1996–2008) uses a 4x108 or 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 or 5x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET18 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 85 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x108 65.1 mm — ET18 —
Version 2 4x108 65.1 mm — ET27 195/65R15
Version 3 5x108 65.1 mm — ET47 195/65R15

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Citroen Berlingo I without rings. Offset, width, diameter and caliper clearance still need checking.

Citroen Ami from 2020 Citroen C4 III from 2020 Citroen C3 Aircross from 2017 Citroen C3 III 2016–2024 Citroen E-Mehari 2016–2019 Citroen C-Elysee from 2014 Citroen C4 Cactus 2014–2023 Citroen DS5 2012–2018 Citroen DS4 2011–2018 Citroen C4 II 2010–2018 Citroen DS3 2010–2016 Citroen C3 II 2009–2016 Citroen C3 Picasso 2009–2017 Citroen C4 I 2004–2011 Citroen C2 2003–2010 Citroen C3 Pluriel 2003–2010

Will wheels from another vehicle fit your Berlingo I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Citroen Berlingo I?

A Citroen Berlingo I (1996–2008) can have a 4x108 or 5x108 PCD depending on the version: check on an original wheel.

Does a Citroen Berlingo I need a hub centric ring?

The centre bore (hub diameter) of a Citroen Berlingo I is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Citroen Berlingo I?

The recorded original offset is ET18 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Citroen Berlingo I?

The specified tightening torque is 85 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Citroen Berlingo I?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: Citroen Ami, Citroen C4 III, Citroen C3 Aircross, Citroen C3 III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.