FRENES

Dacia Duster III PCD

from 2024
VERIFIED
⌀66.1
PCD5x114.3
Centre bore66.1 mm
Offset (ET)ET32 to ET36
Fixing typeM12x1.5
Original tyres215/70R16, 215/65R17, 225/60R17
Déport nettement plus faible que sur le Duster II (ET32 contre ET50) : ne pas reprendre les jantes de l'ancienne génération sans vérifier.
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Dacia Duster III

A Dacia Duster III (from 2024) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET32 to ET36. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/70R16, 215/65R17, 225/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 66.1 mm 6.5Jx16 ET32 215/70R16
Version 2 5x114.3 66.1 mm 6.5Jx17 ET32 215/65R17
Version 3 5x114.3 66.1 mm 6.5Jx17 ET36 225/60R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Dacia Duster III without rings. Offset, width, diameter and caliper clearance still need checking.

Dacia Bigster from 2025 Dacia Duster II 2017–2024 Dacia Duster I 2010–2017 Renault 4 E-Tech from 2025 Renault 5 E-Tech from 2024 Renault Grand Kangoo from 2024 Renault Rafale from 2024 Renault Symbioz from 2024 Renault Scenic E-Tech from 2023 Nissan Qashqai J12 from 2022 Nissan Townstar from 2022 Renault Austral from 2022 Renault Megane E-Tech from 2022 Infiniti QX55 from 2021 Infiniti QX60 from 2021 Nissan Ariya from 2021

Will wheels from another vehicle fit your Duster III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Dacia Duster III?

A Dacia Duster III (from 2024) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Dacia Duster III need a hub centric ring?

The centre bore (hub diameter) of a Dacia Duster III is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Dacia Duster III?

The recorded original offset is ET32 to ET36 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Dacia Duster III?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Dacia Bigster, Dacia Duster II, Dacia Duster I, Renault 4 E-Tech. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.