FRENES

Wheels from Alpine A110 axe arrière on Nissan Qashqai J12: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Alpine A110 axe arrière bolt on and centre on Nissan Qashqai J12 without rings. You still need to check the offset and tyres, detailed below.

Alpine A110 axe arrièrefrom 2017Nissan Qashqai J12from 2022
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.50M12x1.50
Original wheels ≈7.5Jx17 ET40 ≈7Jx17 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Alpine A110 axe arrière is compared with the one from Nissan Qashqai J12 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx17 ET40 · 235/45R17 — Check on the car

    Compared with the original ≈7Jx17 ET40 on Nissan Qashqai J12: shock absorber side +6.4 mm, wheel arch side +6.4 mm, tyre diameter −9.6 % : fit it with the original tyre size of Nissan Qashqai J12 (215/65R17), not that of Alpine A110 axe arrière. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Qashqai J12 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan Qashqai J12 on Alpine A110 axe arrière?