FRENES

Wheels from Alpine GTA axe arrière on Renault Clio 5: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 60.1 mm centre bore: wheels from Alpine GTA axe arrière bolt on and centre on Renault Clio 5 without rings. You still need to check the offset and tyres, detailed below.

Alpine GTA axe arrière1985–1991Renault Clio 5from 2019
PCD4x1004x100
Centre bore60.1 mm60.1 mm
ThreadEcrous - 12x1.50M12x1.50
Original wheels ≈8Jx15 ET20 6Jx15 ET31
6.5Jx16 ET37
7Jx17 ET37

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Alpine GTA axe arrière is compared with the one from Renault Clio 5 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈8Jx15 ET20 · 255/45R15 — Check on the car

    Compared with the original 6Jx15 ET31 on Renault Clio 5: shock absorber side +14.4 mm, wheel arch side +36.4 mm, tyre diameter −1.8 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Clio 5 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Clio 5 on Alpine GTA axe arrière?