FRENES

Wheels from Audi A3 8Y on MG ZS EV: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Audi A3 8Y bolt on and centre on MG ZS EV without rings. You still need to check the offset and tyres, detailed below.

Audi A3 8Yfrom 2020MG ZS EVfrom 2019
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.50
Original wheels ≈6.5Jx16 ET46 ≈6.5Jx16 ET41

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Audi A3 8Y is compared with the one from MG ZS EV of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET46 · 205/55R16 — Check on the car

    Compared with the original ≈6.5Jx16 ET41 on MG ZS EV: shock absorber side +5 mm, wheel arch side −5 mm, tyre diameter −3.1 % : fit it with the original tyre size of MG ZS EV (205/60R16), not that of Audi A3 8Y. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of MG ZS EV (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from MG ZS EV on Audi A3 8Y?