Same 5x112 PCD and same 66.5 mm centre bore: wheels from Audi A4 B9 bolt on and centre on Mercedes C-Classe W205 without rings. You still need to check the offset and tyres, detailed below.
| Audi A4 B92015–2019 | Mercedes C-Classe W2052013–2021 | |
|---|---|---|
| PCD | 5x112 | 5x112 |
| Centre bore | 66.5 mm | 66.5 mm |
| Thread | M14x1.50 | M14x1.50 |
| Original wheels | 7Jx16 ET35 | 6.5Jx16 ET38 |
≈: width estimated from the original tyre size.
Each original wheel from Audi A4 B9 is compared with the one from Mercedes C-Classe W205 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 6.5Jx16 ET38 on Mercedes C-Classe W205: shock absorber side +3.3 mm, wheel arch side +9.3 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mercedes C-Classe W205 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Mercedes C-Classe W205 on Audi A4 B9?