Yes, the hub is identical
Same 5x112 PCD and same 66.5 mm centre bore: wheels from BMW 6 Serie G32 bolt on and centre on Mercedes C-Classe 450 AMG without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from BMW 6 Serie G32 is compared with the one from Mercedes C-Classe 450 AMG of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
8Jx18 ET30 · 245/50R18 — Check on the car
Compared with the original 7.5Jx18 ET33 on Mercedes C-Classe 450 AMG: shock absorber side +3.3 mm, wheel arch side +9.3 mm, tyre diameter +6.4 % : fit it with the original tyre size of Mercedes C-Classe 450 AMG (225/45R18), not that of BMW 6 Serie G32.
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mercedes C-Classe 450 AMG (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Mercedes C-Classe 450 AMG on BMW 6 Serie G32?