Yes, the hub is identical
Same 5x112 PCD and same 66.6 mm centre bore: wheels from BMW X2 U10 bolt on and centre on Maybach 57 S without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from BMW X2 U10 is compared with the one from Maybach 57 S of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7.5Jx19 ET46 · 245/45R19 — Check on the car
Compared with the original ≈8.5Jx19 ET67 on Maybach 57 S: shock absorber side −33.7 mm, wheel arch side +8.3 mm, tyre diameter −7.2 % : fit it with the original tyre size of Maybach 57 S (275/50R19), not that of BMW X2 U10.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Maybach 57 S (-), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Maybach 57 S on BMW X2 U10?