FRENES

Wheels from BMW X2 U10 on Maybach 62 S: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 66.6 mm centre bore: wheels from BMW X2 U10 bolt on and centre on Maybach 62 S without rings. You still need to check the offset and tyres, detailed below.

BMW X2 U10from 2024Maybach 62 S2006–2013
PCD5x1125x112
Centre bore66.6 mm66.6 mm
ThreadM14x1.25-
Original wheels ≈7.5Jx19 ET46 ≈8.5Jx19 ET67

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from BMW X2 U10 is compared with the one from Maybach 62 S of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx19 ET46 · 245/45R19 — Check on the car

    Compared with the original ≈8.5Jx19 ET67 on Maybach 62 S: shock absorber side −33.7 mm, wheel arch side +8.3 mm, tyre diameter −7.2 % : fit it with the original tyre size of Maybach 62 S (275/50R19), not that of BMW X2 U10. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Maybach 62 S (-), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Maybach 62 S on BMW X2 U10?