FRENES

Wheels from BMW X5 G05 on BMW X4M F98: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 66.6 mm centre bore: wheels from BMW X5 G05 bolt on and centre on BMW X4M F98 without rings. You still need to check the offset and tyres, detailed below.

BMW X5 G05from 2018BMW X4M F98from 2019
PCD5x1125x112
Centre bore66.6 mm66.6 mm
ThreadM14x1.25M14x1.25
Original wheels 9Jx20 ET35 9Jx20 ET28

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from BMW X5 G05 is compared with the one from BMW X4M F98 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 9Jx20 ET35 · 275/45R20 — Check on the car

    Compared with the original 9Jx20 ET28 on BMW X4M F98: shock absorber side +7 mm, wheel arch side −7 mm, tyre diameter +2.4 % : fit it with the original tyre size of BMW X4M F98 (255/45R20), not that of BMW X5 G05. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BMW X4M F98 (M14x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from BMW X4M F98 on BMW X5 G05?