Same 5x112 PCD and same 66.6 mm centre bore: wheels from BMW XM G09 axe avant bolt on and centre on Rolls-Royce Cullinan without rings. You still need to check the offset and tyres, detailed below.
| BMW XM G09 axe avantfrom 2023 | Rolls-Royce Cullinanfrom 2018 | |
|---|---|---|
| PCD | 5x112 | 5x112 |
| Centre bore | 66.6 mm | 66.6 mm |
| Thread | M14x1.25 | M14x1.50 |
| Original wheels | 9.5Jx21 ET19 | 8Jx21 ET35 8.5Jx22 ET35 |
≈: width estimated from the original tyre size.
Each original wheel from BMW XM G09 axe avant is compared with the one from Rolls-Royce Cullinan of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 8Jx21 ET35 on Rolls-Royce Cullinan: shock absorber side +3 mm, wheel arch side +35.1 mm, tyre diameter −1 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Rolls-Royce Cullinan (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Rolls-Royce Cullinan on BMW XM G09 axe avant?