FRENES

Wheels from BYD Seal on Honda CR-V RS: compatible?

Yes, the hub is identical

Same 5x120 PCD and same 64.1 mm centre bore: wheels from BYD Seal bolt on and centre on Honda CR-V RS without rings. You still need to check the offset and tyres, detailed below.

BYD Sealfrom 2022Honda CR-V RSfrom 2023
PCD5x1205x120
Centre bore64.1 mm64.1 mm
ThreadEcrous - 12x1.50M14x1.5
Original wheels ≈7.5Jx19 ET41 7.5Jx18 ET40
7.5Jx19 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from BYD Seal is compared with the one from Honda CR-V RS of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx19 ET41 · 245/45R19 — Fits like the original

    Compared with the original 7.5Jx19 ET40 on Honda CR-V RS: shock absorber side +1 mm, wheel arch side −1 mm, tyre diameter −5.1 % : fit it with the original tyre size of Honda CR-V RS (235/55R19), not that of BYD Seal. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Honda CR-V RS (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Honda CR-V RS on BYD Seal?