Yes, the hub is identical
Same 4x100 PCD and same 56.6 mm centre bore: wheels from Chevrolet Kalos bolt on and centre on Holden Barina Spark without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Chevrolet Kalos is compared with the one from Holden Barina Spark of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈5.5Jx13 ET45 · 175/70R13 — Check on the car
Compared with the original ≈5Jx13 ET45 on Holden Barina Spark: shock absorber side +6.3 mm, wheel arch side +6.3 mm, tyre diameter −0.5 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Holden Barina Spark (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Holden Barina Spark on Chevrolet Kalos?