FRENES

Wheels from Citroen C3 III on Citroen E-Mehari: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Citroen C3 III bolt on and centre on Citroen E-Mehari without rings. You still need to check the offset and tyres, detailed below.

Citroen C3 III2016–2024Citroen E-Mehari2016–2019
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6Jx15 ET23
6.5Jx16 ET20		 6Jx15 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen C3 III is compared with the one from Citroen E-Mehari of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET23 · 195/65R15 — Check on the car

    Compared with the original 6Jx15 ET35 on Citroen E-Mehari: shock absorber side −12 mm, wheel arch side +12 mm, tyre diameter +2.1 % : fit it with the original tyre size of Citroen E-Mehari (185/65R15), not that of Citroen C3 III. Check in detail

  • 6.5Jx16 ET20 · 205/55R16

    Citroen E-Mehari has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Citroen E-Mehari (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Citroen E-Mehari on Citroen C3 III?