Yes, the hub is identical
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Citroen C4 Aircross bolt on and centre on Mazda CX-30 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Citroen C4 Aircross is compared with the one from Mazda CX-30 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
6.5Jx16 ET38 · 215/70R16 — Check on the car
Compared with the original 6.5Jx16 ET45 on Mazda CX-30: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter +3.1 % : fit it with the original tyre size of Mazda CX-30 (215/65R16), not that of Citroen C4 Aircross.
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mazda CX-30 (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Mazda CX-30 on Citroen C4 Aircross?