FRENES

Wheels from Citroen C4 III on Citroen C3 II: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Citroen C4 III bolt on and centre on Citroen C3 II without rings. You still need to check the offset and tyres, detailed below.

Citroen C4 IIIfrom 2020Citroen C3 II2009–2016
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6.5Jx16 ET32
6.5Jx18 ET26		 6Jx15 ET23
6Jx16 ET23
7Jx17 ET26

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen C4 III is compared with the one from Citroen C3 II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET32 · 215/65R16 — Risk of rubbing

    Compared with the original 6Jx16 ET23 on Citroen C3 II: shock absorber side +15.4 mm, wheel arch side −2.6 mm, tyre diameter +10.5 % : fit it with the original tyre size of Citroen C3 II (195/55R16), not that of Citroen C4 III. Check in detail

  • 6.5Jx18 ET26 · 195/60R18

    Citroen C3 II has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Citroen C3 II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Citroen C3 II on Citroen C4 III?