Yes, the hub is identical
Same 4x108 PCD and same 65.1 mm centre bore: wheels from Citroen C4 X bolt on and centre on Citroen Berlingo II without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Citroen C4 X is compared with the one from Citroen Berlingo II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
6.5Jx16 ET32 · 215/65R16 — Check on the car
Compared with the original 6.5Jx16 ET26 on Citroen Berlingo II: shock absorber side +6 mm, wheel arch side −6 mm, tyre diameter +6.7 % : fit it with the original tyre size of Citroen Berlingo II (215/55R16), not that of Citroen C4 X.
Check in detail
- ?
6.5Jx18 ET26 · 195/60R18
Citroen Berlingo II has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Citroen Berlingo II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Citroen Berlingo II on Citroen C4 X?