FRENES

Wheels from Citroen CX on Fiat Doblo: compatible?

Yes, the hub is identical

Same 5x98 PCD and same 58.1 mm centre bore: wheels from Citroen CX bolt on and centre on Fiat Doblo without rings. You still need to check the offset and tyres, detailed below.

Citroen CX1974–1985Fiat Doblo2001–2005
PCD5x984x98 / 5x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M12x1.25
Original wheels ≈6Jx14 ET49 ≈5.5Jx14 ET43
≈6Jx15 ET43
≈6Jx15 ET36
≈6.5Jx16 ET36

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen CX is compared with the one from Fiat Doblo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx14 ET49 · 185/70R14 — Check on the car

    Compared with the original ≈5.5Jx14 ET43 on Fiat Doblo: shock absorber side +12.4 mm, wheel arch side 0 mm, tyre diameter +2.3 % : fit it with the original tyre size of Fiat Doblo (175/70R14), not that of Citroen CX. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat Doblo (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Fiat Doblo on Citroen CX?