FRENES

Wheels from Cupra Leon Sportstourer on Volkswagen ID.Buzz axe arrière: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Cupra Leon Sportstourer bolt on and centre on Volkswagen ID.Buzz axe arrière without rings. You still need to check the offset and tyres, detailed below.

Cupra Leon Sportstourerfrom 2020Volkswagen ID.Buzz axe arrièrefrom 2022
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.50
Original wheels 7.5Jx18 ET46 8.5Jx18 ET56

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Cupra Leon Sportstourer is compared with the one from Volkswagen ID.Buzz axe arrière of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx18 ET46 · 225/40R18 — Fits like the original

    Compared with the original 8.5Jx18 ET56 on Volkswagen ID.Buzz axe arrière: shock absorber side −22.7 mm, wheel arch side −2.7 mm, tyre diameter −13.6 % : fit it with the original tyre size of Volkswagen ID.Buzz axe arrière (255/55R18), not that of Cupra Leon Sportstourer. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volkswagen ID.Buzz axe arrière (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Volkswagen ID.Buzz axe arrière on Cupra Leon Sportstourer?