Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Dacia Bigster bolt on and centre on Renault Symbioz without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Dacia Bigster is compared with the one from Renault Symbioz of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈7Jx17 ET32 · 215/65R17 — Fits like the original
Compared with the original 7Jx17 ET35 on Renault Symbioz: shock absorber side −3 mm, wheel arch side +3 mm, tyre diameter +3.1 % : fit it with the original tyre size of Renault Symbioz (215/60R17), not that of Dacia Bigster.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Symbioz (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Symbioz on Dacia Bigster?