FRENES

Wheels from Dacia Duster II on Renault Symbioz: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Dacia Duster II bolt on and centre on Renault Symbioz without rings. You still need to check the offset and tyres, detailed below.

Dacia Duster II2017–2024Renault Symbiozfrom 2024
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.50Ecrous - 12x1.25
Original wheels 6Jx16 ET50
6.5Jx16 ET50
6.5Jx17 ET50		 7Jx17 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Dacia Duster II is compared with the one from Renault Symbioz of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx17 ET50 · 215/60R17 — Check on the car

    Compared with the original 7Jx17 ET35 on Renault Symbioz: shock absorber side +8.7 mm, wheel arch side −21.4 mm, tyre diameter +0 %. Check in detail

  • 6Jx16 ET50 · 215/65R16

    Renault Symbioz has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx16 ET50 · 215/65R16

    Renault Symbioz has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Symbioz (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Symbioz on Dacia Duster II?