Same 4x100 PCD and same 60.1 mm centre bore: wheels from Dacia Spring bolt on and centre on Renault Twingo 2 without rings. You still need to check the offset and tyres, detailed below.
| Dacia Springfrom 2021 | Renault Twingo 22007–2014 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 60.1 mm | 60.1 mm |
| Thread | M12x1.50 | M12x1.5 |
| Original wheels | 4.5Jx14 ET37 | 5.5Jx14 ET29 |
≈: width estimated from the original tyre size.
Each original wheel from Dacia Spring is compared with the one from Renault Twingo 2 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5.5Jx14 ET29 on Renault Twingo 2: shock absorber side −4.7 mm, wheel arch side −20.7 mm, tyre diameter +0.6 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Twingo 2 (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Twingo 2 on Dacia Spring?