FRENES

Wheels from Fiat 600 on DS DS 3 Crossback: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Fiat 600 bolt on and centre on DS DS 3 Crossback without rings. You still need to check the offset and tyres, detailed below.

Fiat 600from 2023DS DS 3 Crossback2018–2021
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels ≈7Jx16 ET32 6.5Jx16 ET32

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Fiat 600 is compared with the one from DS DS 3 Crossback of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx16 ET32 · 215/65R16 — Check on the car

    Compared with the original 6.5Jx16 ET32 on DS DS 3 Crossback: shock absorber side +6.3 mm, wheel arch side +6.3 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of DS DS 3 Crossback (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from DS DS 3 Crossback on Fiat 600?