Same 4x98 PCD and same 58.1 mm centre bore: wheels from Fiat Linea bolt on and centre on Fiat Qubo without rings. You still need to check the offset and tyres, detailed below.
| Fiat Linea2007–2016 | Fiat Qubofrom 2010 | |
|---|---|---|
| PCD | 4x98 | 4x98 |
| Centre bore | 58.1 mm | 58.1 mm |
| Thread | M12x1.25 | M12x1.25 |
| Original wheels | 6Jx15 ET43 | 6Jx15 ET44 |
≈: width estimated from the original tyre size.
Each original wheel from Fiat Linea is compared with the one from Fiat Qubo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 6Jx15 ET44 on Fiat Qubo: shock absorber side −1 mm, wheel arch side +1 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat Qubo (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Fiat Qubo on Fiat Linea?