FRENES

Wheels from Fiat Panda III on Lada Kalina: compatible?

Yes, the hub is identical

Same 4x98 PCD and same 58.1 mm centre bore: wheels from Fiat Panda III bolt on and centre on Lada Kalina without rings. You still need to check the offset and tyres, detailed below.

Fiat Panda IIIfrom 2012Lada Kalina2004–2018
PCD4x984x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M12x1.25
Original wheels 5.5Jx14 ET35
5.5Jx14 ET35
5.5Jx14 ET35
5.5Jx15 ET35
6Jx15 ET35
6Jx15 ET35
6Jx16 ET35		 ≈5.5Jx14 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Fiat Panda III is compared with the one from Lada Kalina of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 5.5Jx14 ET35 · 165/65R14 — Fits like the original

    Compared with the original ≈5.5Jx14 ET35 on Lada Kalina: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter −2.2 % : fit it with the original tyre size of Lada Kalina (175/65R14), not that of Fiat Panda III. Comparison for guidance only (estimated width). Check in detail

  • 5.5Jx14 ET35 · 165/70R14 — Fits like the original

    Compared with the original ≈5.5Jx14 ET35 on Lada Kalina: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0.6 %. Comparison for guidance only (estimated width). Check in detail

  • 5.5Jx14 ET35 · 175/65R14 — Fits like the original

    Compared with the original ≈5.5Jx14 ET35 on Lada Kalina: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • 5.5Jx15 ET35 · 175/65R15

    Lada Kalina has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6Jx15 ET35 · 175/65R15

    Lada Kalina has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6Jx15 ET35 · 185/55R15

    Lada Kalina has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6Jx16 ET35 · 195/45R16

    Lada Kalina has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lada Kalina (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Lada Kalina on Fiat Panda III?