FRENES

Wheels from Ford Capri on Lamborghini Huracan axe avant: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Ford Capri bolt on and centre on Lamborghini Huracan axe avant without rings. You still need to check the offset and tyres, detailed below.

Ford Caprifrom 2024Lamborghini Huracan axe avantfrom 2014
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.50
Original wheels 8Jx19 ET45 ≈7.5Jx19 ET42

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Ford Capri is compared with the one from Lamborghini Huracan axe avant of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8Jx19 ET45 · 235/55R19 — Check on the car

    Compared with the original ≈7.5Jx19 ET42 on Lamborghini Huracan axe avant: shock absorber side +9.3 mm, wheel arch side +3.3 mm, tyre diameter +13.3 % : fit it with the original tyre size of Lamborghini Huracan axe avant (245/35R19), not that of Ford Capri. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lamborghini Huracan axe avant (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Lamborghini Huracan axe avant on Ford Capri?