Yes, the hub is identical
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Ford Probe bolt on and centre on Kia Ceed III without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Ford Probe is compared with the one from Kia Ceed III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈6.5Jx15 ET40 · 205/55R15 — Check on the car
Compared with the original 6Jx15 ET46 on Kia Ceed III: shock absorber side 0 mm, wheel arch side +12.4 mm, tyre diameter −4.4 % : fit it with the original tyre size of Kia Ceed III (195/65R15), not that of Ford Probe.
Comparison for guidance only (estimated width). Check in detail
- ?
≈6Jx14 ET42 · 185/70R14
Kia Ceed III has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Kia Ceed III (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Kia Ceed III on Ford Probe?