Yes, the hub is identical
Same 5x120 PCD and same 64.1 mm centre bore: wheels from Honda Prelude (2025) bolt on and centre on BYD Sealion 7 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Honda Prelude (2025) is compared with the one from BYD Sealion 7 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✕
8.5Jx19 ET60 · 235/40R19 — Risk of rubbing
Compared with the original 8.5Jx19 ET40 on BYD Sealion 7: shock absorber side +20 mm, wheel arch side −20 mm, tyre diameter −5.8 % : fit it with the original tyre size of BYD Sealion 7 (255/45R19), not that of Honda Prelude (2025).
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BYD Sealion 7 (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from BYD Sealion 7 on Honda Prelude (2025)?