FRENES

Wheels from Hyundai Bayon on Kia Rio: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 54.1 mm centre bore: wheels from Hyundai Bayon bolt on and centre on Kia Rio without rings. You still need to check the offset and tyres, detailed below.

Hyundai Bayonfrom 2021Kia Rio2000–2005
PCD4x1004x100
Centre bore54.1 mm54.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels 6Jx15 ET47 ≈5.5Jx13 ET45
≈6Jx14 ET45
≈6Jx15 ET43

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai Bayon is compared with the one from Kia Rio of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET47 · 185/65R15 — Check on the car

    Compared with the original ≈6Jx15 ET43 on Kia Rio: shock absorber side +4 mm, wheel arch side −4 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Kia Rio (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Kia Rio on Hyundai Bayon?