Yes, the hub is identical
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Kia EV3 bolt on and centre on Mazda CX-7 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Kia EV3 is compared with the one from Mazda CX-7 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
7Jx17 ET48 · 215/60R17 — Fits like the original
Compared with the original ≈7.5Jx17 ET50 on Mazda CX-7: shock absorber side −8.4 mm, wheel arch side −4.4 mm, tyre diameter −6.4 % : fit it with the original tyre size of Mazda CX-7 (235/65R17), not that of Kia EV3.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mazda CX-7 (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Mazda CX-7 on Kia EV3?