Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Kia Venga bolt on and centre on Kia Ceed I without rings. You still need to check the offset and tyres, detailed below.
| Kia Venga2010–2019 | Kia Ceed I2007–2012 | |
|---|---|---|
| PCD | 5x114.3 | 5x114.3 |
| Centre bore | 67.1 mm | 67.1 mm |
| Thread | Ecrous - 12x1.50 | Ecrous - 12x1.50 |
| Original wheels | 6Jx15 ET48 | R 5.5Jx15 ET46 |
≈: width estimated from the original tyre size.
Each original wheel from Kia Venga is compared with the one from Kia Ceed I of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5.5Jx15 ET46 on Kia Ceed I: shock absorber side +8.3 mm, wheel arch side +4.3 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Kia Ceed I (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Kia Ceed I on Kia Venga?