FRENES

Wheels from Land Rover Discovery Sport on Lynk&Co 02: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 63.4 mm centre bore: wheels from Land Rover Discovery Sport bolt on and centre on Lynk&Co 02 without rings. You still need to check the offset and tyres, detailed below.

Land Rover Discovery Sportfrom 2014Lynk&Co 02from 2024
PCD5x1085x108
Centre bore63.4 mm63.4 mm
ThreadM14x1.5M14x1.50
Original wheels 7Jx17 ET45
7.5Jx17 ET45
8Jx18 ET45
8Jx19 ET45
8.5Jx19 ET53
8Jx20 ET45		 ≈7.5Jx19 ET47

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Land Rover Discovery Sport is compared with the one from Lynk&Co 02 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8Jx19 ET45 · 235/55R19 — Check on the car

    Compared with the original ≈7.5Jx19 ET47 on Lynk&Co 02: shock absorber side +4.3 mm, wheel arch side +8.3 mm, tyre diameter +3.3 % : fit it with the original tyre size of Lynk&Co 02 (235/50R19), not that of Land Rover Discovery Sport. Comparison for guidance only (estimated width). Check in detail

  • 8.5Jx19 ET53 · 235/55R19 — Check on the car

    Compared with the original ≈7.5Jx19 ET47 on Lynk&Co 02: shock absorber side +18.7 mm, wheel arch side +6.7 mm, tyre diameter +3.3 % : fit it with the original tyre size of Lynk&Co 02 (235/50R19), not that of Land Rover Discovery Sport. Comparison for guidance only (estimated width). Check in detail

  • 7Jx17 ET45 · 225/65R17

    Lynk&Co 02 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7.5Jx17 ET45 · 235/65R17

    Lynk&Co 02 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 8Jx18 ET45 · 235/60R18

    Lynk&Co 02 has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 8Jx20 ET45 · 235/50R20

    Lynk&Co 02 has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lynk&Co 02 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Lynk&Co 02 on Land Rover Discovery Sport?