FRENES

Wheels from Land Rover Freelander on Honda HR-V: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from Land Rover Freelander bolt on and centre on Honda HR-V without rings. You still need to check the offset and tyres, detailed below.

Land Rover Freelander1998–2006Honda HR-V1999–2005
PCD5x114.35x114.3
Centre bore64.1 mm64.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈7Jx15 ET46 ≈6Jx15 ET45
≈7Jx16 ET55

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Land Rover Freelander is compared with the one from Honda HR-V of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx15 ET46 · 215/70R15 — Check on the car

    Compared with the original ≈6Jx15 ET45 on Honda HR-V: shock absorber side +13.7 mm, wheel arch side +11.7 mm, tyre diameter +4.3 % : fit it with the original tyre size of Honda HR-V (195/70R15), not that of Land Rover Freelander. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Honda HR-V (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Honda HR-V on Land Rover Freelander?