Yes, the hub is identical
Same 5x120 PCD and same 60.1 mm centre bore: wheels from Lexus LS bolt on and centre on Toyota Mirai without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Lexus LS is compared with the one from Toyota Mirai of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7.5Jx19 ET25 · 245/50R19 — Check on the car
Compared with the original ≈7.5Jx19 ET35 on Toyota Mirai: shock absorber side −10 mm, wheel arch side +10 mm, tyre diameter −1.8 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota Mirai (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota Mirai on Lexus LS?