Yes, the hub is identical
Same 5x112 PCD and same 57.1 mm centre bore: wheels from McLaren 750S bolt on and centre on Skoda Elroq without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from McLaren 750S is compared with the one from Skoda Elroq of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✕
9Jx19 ET41.65 · 245/35R19 — Risk of rubbing
Compared with the original 8Jx19 ET45 on Skoda Elroq: shock absorber side +9.3 mm, wheel arch side +16.1 mm, tyre diameter −11.7 % : fit it with the original tyre size of Skoda Elroq (235/55R19), not that of McLaren 750S.
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Skoda Elroq (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Skoda Elroq on McLaren 750S?