FRENES

Wheels from Mercedes C-Classe W202 C36 AMG on Mercedes B-Classe W245 15 inch: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 66.6 mm centre bore: wheels from Mercedes C-Classe W202 C36 AMG bolt on and centre on Mercedes B-Classe W245 15 inch without rings. You still need to check the offset and tyres, detailed below.

Mercedes C-Classe W202 C36 AMG1995–1998Mercedes B-Classe W245 15 inch2005–2011
PCD5x1125x112
Centre bore66.6 mm66.6 mm
ThreadM12x1.50M14x1.50
Original wheels ≈6Jx15 ET37 6Jx15 ET44

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mercedes C-Classe W202 C36 AMG is compared with the one from Mercedes B-Classe W245 15 inch of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET37 · 195/65R15 — Check on the car

    Compared with the original 6Jx15 ET44 on Mercedes B-Classe W245 15 inch: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mercedes B-Classe W245 15 inch (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mercedes B-Classe W245 15 inch on Mercedes C-Classe W202 C36 AMG?