Same 5x112 PCD and same 66.6 mm centre bore: wheels from Mercedes EQA bolt on and centre on BMW X4 G02 without rings. You still need to check the offset and tyres, detailed below.
| Mercedes EQAfrom 2021 | BMW X4 G02from 2018 | |
|---|---|---|
| PCD | 5x112 | 5x112 |
| Centre bore | 66.6 mm | 66.6 mm |
| Thread | M14x1.50 | M14x1.25 |
| Original wheels | 6.5Jx18 ET44.5 | 7Jx18 ET22 |
≈: width estimated from the original tyre size.
Each original wheel from Mercedes EQA is compared with the one from BMW X4 G02 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 7Jx18 ET22 on BMW X4 G02: shock absorber side +16.2 mm, wheel arch side −28.9 mm, tyre diameter −1.7 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BMW X4 G02 (M14x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from BMW X4 G02 on Mercedes EQA?