FRENES

Wheels from Mercedes EQA on Mercedes E-Classe W212 E63 AMG: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 66.6 mm centre bore: wheels from Mercedes EQA bolt on and centre on Mercedes E-Classe W212 E63 AMG without rings. You still need to check the offset and tyres, detailed below.

Mercedes EQAfrom 2021Mercedes E-Classe W212 E63 AMG2009–2016
PCD5x1125x112
Centre bore66.6 mm66.6 mm
ThreadM14x1.50M14x1.50
Original wheels 6.5Jx18 ET44.5 ≈8Jx18 ET52

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mercedes EQA is compared with the one from Mercedes E-Classe W212 E63 AMG of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx18 ET44.5 · 215/60R18 — Fits like the original

    Compared with the original ≈8Jx18 ET52 on Mercedes E-Classe W212 E63 AMG: shock absorber side −26.6 mm, wheel arch side −11.6 mm, tyre diameter +8.2 % : fit it with the original tyre size of Mercedes E-Classe W212 E63 AMG (255/40R18), not that of Mercedes EQA. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mercedes E-Classe W212 E63 AMG (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mercedes E-Classe W212 E63 AMG on Mercedes EQA?