FRENES

Wheels from MG eHS on MG RX5: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 66.6 mm centre bore: wheels from MG eHS bolt on and centre on MG RX5 without rings. You still need to check the offset and tyres, detailed below.

MG eHSfrom 2020MG RX52018–2023
PCD5x1125x112
Centre bore66.6 mm66.6 mm
ThreadM14x1.50M14x1.50
Original wheels ≈7Jx17 ET41 ≈7Jx17 ET41
≈7Jx18 ET41

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from MG eHS is compared with the one from MG RX5 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx17 ET41 · 215/60R17 — Fits like the original

    Compared with the original ≈7Jx17 ET41 on MG RX5: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of MG RX5 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from MG RX5 on MG eHS?