FRENES

Wheels from MG MG5 on Seat Leon IV: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from MG MG5 bolt on and centre on Seat Leon IV without rings. You still need to check the offset and tyres, detailed below.

MG MG5from 2019Seat Leon IVfrom 2020
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.5
Original wheels ≈6.5Jx16 ET41 6Jx15 ET43
6.5Jx16 ET46
7Jx16 ET43
7.5Jx17 ET46

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from MG MG5 is compared with the one from Seat Leon IV of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET41 · 205/60R16 — Fits like the original

    Compared with the original 6.5Jx16 ET46 on Seat Leon IV: shock absorber side −5 mm, wheel arch side +5 mm, tyre diameter +3.2 % : fit it with the original tyre size of Seat Leon IV (205/55R16), not that of MG MG5. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Seat Leon IV (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Seat Leon IV on MG MG5?