FRENES

Wheels from Mini Countryman on BMW 2 Serie F44: compatible?

Yes, with hub centric rings

Same 5x112 PCD, but the centre bore of the wheels from Mini Countryman (72.5 mm) is larger than the hub of BMW 2 Serie F44 (66.6 mm): you need 4 hub centric rings 72.5 → 66.6.

Rings 72.5 → 66.6

Mini Countryman2010–2016BMW 2 Serie F44from 2021
PCD5x120 / 5x1125x112
Centre bore72.5 mm66.6 mm
ThreadM14x1.25M14x1.25
Original wheels R
≈6.5Jx16 ET41		 ≈6Jx16 ET47

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mini Countryman is compared with the one from BMW 2 Serie F44 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET41 · 205/65R16 — Check on the car

    Compared with the original ≈6Jx16 ET47 on BMW 2 Serie F44: shock absorber side 0 mm, wheel arch side +12.4 mm, tyre diameter +5.1 % : fit it with the original tyre size of BMW 2 Serie F44 (195/60R16), not that of Mini Countryman. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BMW 2 Serie F44 (M14x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from BMW 2 Serie F44 on Mini Countryman?