FRENES

Wheels from Mitsubishi Outlander on Renault Grand Kangoo: compatible?

Yes, with hub centric rings

Same 5x114.3 PCD, but the centre bore of the wheels from Mitsubishi Outlander (67.1 mm) is larger than the hub of Renault Grand Kangoo (66.1 mm): you need 4 hub centric rings 67.1 → 66.1.

Rings 67.1 → 66.1

Mitsubishi Outlander2003–2007Renault Grand Kangoofrom 2024
PCD5x114.35x114.3
Centre bore67.1 mm66.1 mm
ThreadEcrous - 12x1.50M12x1.50
Original wheels R
R
≈7Jx16 ET38
≈7.5Jx18 ET35		 6.5Jx16 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mitsubishi Outlander is compared with the one from Renault Grand Kangoo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx16 ET38 · 215/70R16 — Check on the car

    Compared with the original 6.5Jx16 ET40 on Renault Grand Kangoo: shock absorber side +4.3 mm, wheel arch side +8.3 mm, tyre diameter +8.4 % : fit it with the original tyre size of Renault Grand Kangoo (205/60R16), not that of Mitsubishi Outlander. Comparison for guidance only (estimated width). Check in detail

  • ≈7.5Jx18 ET35 · 235/60R18

    Renault Grand Kangoo has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Grand Kangoo (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Grand Kangoo on Mitsubishi Outlander?