FRENES

Wheels from Mitsubishi Outlander on Renault Megane E-Tech: compatible?

Yes, with hub centric rings

Same 5x114.3 PCD, but the centre bore of the wheels from Mitsubishi Outlander (67.1 mm) is larger than the hub of Renault Megane E-Tech (66.1 mm): you need 4 hub centric rings 67.1 → 66.1.

Rings 67.1 → 66.1

Mitsubishi Outlander2003–2007Renault Megane E-Techfrom 2022
PCD5x114.35x114.3
Centre bore67.1 mm66.1 mm
ThreadEcrous - 12x1.50M12x1.50
Original wheels R
R
≈7Jx16 ET38
≈7.5Jx18 ET35		 6.5Jx18 ET38

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mitsubishi Outlander is compared with the one from Renault Megane E-Tech of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx18 ET35 · 235/60R18 — Check on the car

    Compared with the original 6.5Jx18 ET38 on Renault Megane E-Tech: shock absorber side +9.7 mm, wheel arch side +15.7 mm, tyre diameter +6.9 % : fit it with the original tyre size of Renault Megane E-Tech (195/60R18), not that of Mitsubishi Outlander. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx16 ET38 · 215/70R16

    Renault Megane E-Tech has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Megane E-Tech (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Megane E-Tech on Mitsubishi Outlander?