Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Ariya bolt on and centre on Infiniti QX50 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Ariya is compared with the one from Infiniti QX50 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
7.5Jx19 ET40 · 235/55R19 — Fits like the original
Compared with the original ≈7.5Jx19 ET44 on Infiniti QX50: shock absorber side −4 mm, wheel arch side +4 mm, tyre diameter +0 %.
Comparison for guidance only (estimated width). Check in detail
- ?
8Jx20 ET45 · 255/45R20
Infiniti QX50 has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Infiniti QX50 (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Infiniti QX50 on Nissan Ariya?