Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Ariya bolt on and centre on Infiniti QX55 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Ariya is compared with the one from Infiniti QX55 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
8Jx20 ET45 · 255/45R20 — Check on the car
Compared with the original ≈7Jx20 ET44 on Infiniti QX55: shock absorber side +13.7 mm, wheel arch side +11.7 mm, tyre diameter +3.8 % : fit it with the original tyre size of Infiniti QX55 (225/45R20), not that of Nissan Ariya.
Comparison for guidance only (estimated width). Check in detail
- ?
7.5Jx19 ET40 · 235/55R19
Infiniti QX55 has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Infiniti QX55 (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Infiniti QX55 on Nissan Ariya?