FRENES

Wheels from Nissan GT-R axe avant on Nissan GT-R axe arrière: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan GT-R axe avant bolt on and centre on Nissan GT-R axe arrière without rings. You still need to check the offset and tyres, detailed below.

Nissan GT-R axe avantfrom 2008Nissan GT-R axe arrièrefrom 2008
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadEcrous - 12x1.25Ecrous - 12x1.25
Original wheels 9.5Jx20 ET45 10.5Jx20 ET25

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Nissan GT-R axe avant is compared with the one from Nissan GT-R axe arrière of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 9.5Jx20 ET45 · 255/40R20 — Check on the car

    Compared with the original 10.5Jx20 ET25 on Nissan GT-R axe arrière: shock absorber side +7.3 mm, wheel arch side −32.7 mm, tyre diameter +0.6 %. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan GT-R axe arrière (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan GT-R axe arrière on Nissan GT-R axe avant?