Same 4x100 PCD and same 60.1 mm centre bore: wheels from Nissan Kubistar bolt on and centre on Renault Clio 2 without rings. You still need to check the offset and tyres, detailed below.
| Nissan Kubistar2003–2009 | Renault Clio 21998–2005 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 60.1 mm | 60.1 mm |
| Thread | M12x1.50 | M12x1.50 |
| Original wheels | 5Jx13 ET36 | 5Jx13 ET36 5.5Jx14 ET36 5.5Jx14 ET36 7Jx15 ET48.5 7Jx16 ET48.5 7Jx16 ET38.5 7Jx16 ET45 |
≈: width estimated from the original tyre size.
Each original wheel from Nissan Kubistar is compared with the one from Renault Clio 2 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5Jx13 ET36 on Renault Clio 2: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Clio 2 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Clio 2 on Nissan Kubistar?