Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Murano bolt on and centre on Nissan Leaf without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Murano is compared with the one from Nissan Leaf of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
7.5Jx18 ET50 · 235/65R18 — Check on the car
Compared with the original ≈6Jx18 ET45 on Nissan Leaf: shock absorber side +24.1 mm, wheel arch side +14.1 mm, tyre diameter +10.3 % : fit it with the original tyre size of Nissan Leaf (195/60R18), not that of Nissan Murano.
Comparison for guidance only (estimated width). Check in detail
- ?
≈8Jx20 ET50 · 255/55R20
Nissan Leaf has no 20-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Leaf (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Nissan Leaf on Nissan Murano?